StevenCHN-TOP offer very good service and the products help us a lot
S.N. SharmaCHN-TOP machine help me to improve my imprresion for Chinese machines
MikeBest products with best price, CHN-TOP well done!
Diameter 48mm 55mm Polycrystalline Diamond PCD Blanks
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Material||PCD Cutting Tool Blank||Diameter||48mm 55mm|
|Micro Size||5um/10um/25um||Diamond Layer||0.4-0.6mm|
|Total Thickness||1.0mm/1.6mm/2.0mm/3.2mm||Application||PCD PCBN Diamond Tools Material, Alumium Cutting|
Polycrystalline Diamond PCD Blanks,
55mm PCD Blanks,
48mm PCD Cutting Tool Blanks
|PCD Diamond Layer||0.4-0.6mm|
|Micro Size||5um, 10um, 25um|
|Application||Alumium Alloy , Wooden cutting|
POLYCRYSTALLINE DIAMOND PCD TOOLS CARBIDE INSERTS BLANKS PCD BLANKS FOR PCD CUTTING TOOL BLANKS
Based on the good cooperation with foreign well-known enterprises and scientific research institutions, after years of digestion, introduction, absorption of foreign advanced technology and ideas, we have successfully developed a whole series of polycrystalline diamond blanks(PCD).
And after a long time of testing and practical application, the comprehensive performance of the product(Wear resistance, impact toughness, conductivity, stability, etc.)has approached the international level.
Name: Polycrystalline Diamond
M series-Machining nonferrous metals and nonmetal
W series-Machining nonmetal, especially for woodworking
|ZT10W||10||1.0/1.6/2.0/3.2||47.0/55.0||Middle||Middle||High||Middle grit,good combination property, easy to WEDM||Woodworking, circuit board, plastic, composite,etc|
|ZT025W||28||1.0/1.6/2.0/3.2||47.0/55.0||High||Middle||Middle||Rough grit, long tools' life, could be WEDM||Laminate floor, graphite, sintered ceramic and carbide, composite, etc.|
|ZT302W||30/2||1.0/1.6/2.0/3.2||47.0/55.0||High||Middle||Middle||Good edge quality and strength maintaining, excllent abrasive resistance and thermal stability good EDM machining||Application areas include high silicon aluminum alloys, hard cast irons and bi-metal
|ZT005||5||1.0/1.6/2.0/3.2||47.0/55.0||Low||High||High||Fine grit, precision finishing, easy to WEDM||Alumium alloy, copper alloy, noble metal, circuit board, etc.|
|ZT10M||10||1.0/1.6/2.0/3.2||47.0/55.0||Middle||Middle||Middle||Middle grit,wide range of machining||Low silicon alumium alloy, copper alloy, graphite, plastic, composite,etc.|
|ZT025M||25||1.0/1.6/2.0/3.2||47.0/55.0||High||Middle||Low||Rough grit, long tools' life||High silicon alumium alloy, graphite,plastic, composite,etc|
|ZT302M||30/2||1.0/1.6/2.0/3.2||47.0/55.0||High||Middle||Low||Excellent wear resistance,edge strength,edge quality and good thermal stablity||Application areas include high silicon aluminum alloys, hard cast irons and bi-metal|
Machining Service at CHN-TOP
|Carbide Inserts||Notching, Grinding|
|PCD/PCBN Blank||Laser cutting according to the size|
|Brazing service||PCD PCBN diamond brazing service|
|Grinding||Indexable inserts grinding service|
CHN-TOP Diamond manufactures a PCD cutting tool blank in diameter of 55/47mm. The performance and quality of this large-diameter cutting tool blank is equal in performance to the highest world-class standards.
CHN-TOP not only has world-class production facilities for PCD cutting tool blanks, but also has advanced machines for PCD PCBN diamond grinding, cutting and brazing, and proven PCD surface processing, polishing and cutting technologies.
CHN-TOP produces the widest selection of PCD cutting tool blanks in disc and cut-segment shapes for the precision tooling industry. There are 1μm, 2μm, 5μm, 10μm, 25μm, and mixed grain sizes available. In addition to grain sizes, the product options include polished or non-polished PCD surface, PCD layer thickness and carbide substrate thickness. We also offer nonstandard products on request. We offer technical literature and expert advice from our engineer team. By utilizing the correct grade you can control the surface finish necessary throughout the machining process and receive optimum tool life.
PCD cutting tool blanks are widely used for machining non-ferrous metals and alloys, such as aluminum, copper, aluminum/gray iron composites, as well as nonmetallic materials such as wood, chipboard, ceramics, plastic, rubber etc, where high abrasion resistance and good surface finish are required.
CHN-TOP has been focusing on developing new PCD cutting tool blank grades which are suited to cutting and machining the variety of new and emerging materials in industry, and for tools targeted to meet our customers’ needs.
CHN-TOP is the company offer comprehensive solutions for diamond tools making
With more than 20 years of experience in diamond tools materials, we have a very good relationship with world famous PCD&PCBN blanks' manufacturers and distribute all brands of PCD&PCBN Blanks
- Element 6